Dell 7x0N - page 36

32 Dell PowerVault 7x0N Systems — Connecting to ATM and FDDI Networks

-xDetach IP from an incoming SVC or PVC. IP traffic will no longer be accepted

on the specified VPI and VCI.

-fDelete all dynamic address mappings from the ATM ARP table and close all

Switched Virtual Circuits (SVCs) to all hosts in the table.

NOTES

The allowed values for vpi, vci, aal, and peak will depend on the capabilities of the

ATM adapter used by the given interface. In addition, certain adapters may only

support discrete peak cell rates. If so, the rate will be set to the closest sup-

ported rate, which is less than the specified rate.

encapsulation must be one of null (no encapsulation, the default), llc_routed

(IEEE LLC encapsulation for routed PDUs), or llc_bridged_8023 (IEEE LLC encap-

sulation for Ethernet/802.3 bridged PDUs). If encapsulation is specified as

llc_bridged_8023, the following argument must be the 6-byte colon separated

destination MAC address. decapsulation must be either null (no decapsulation,

the default) or llc (IEEE LLC decapsulation).

CLUSTER CONSIDERATIONS

In takeover mode, the FORE/IP SPANS interface names are those on the live filer,

and in partner mode interface names are those on the failed filer.

In takeover mode, the atmarp command only affects the arp entries of the live

filer, and in partner mode the atmarp command only affects the arp entries of the

failed filer.