Kenmore 116.30912 manual Handle Assembly, Before assembling vacuum, check

WARNING

Electrical Shock Hazard

Do not plug Into the electrical sup- ply until the assembly is complete,, Failure to do so could result in elec-

trical shock or injury°

i i ii iNil,,,ll ii

Before assembling vacuum, check the

PACKING LIST on the cover of the separate

Repair Parts List., Use this list to verify that you have received all the components of

your new Kenmore vacuum,

Position the handle as shown in the il{ustra- tion below

Slide {he handle into the opening at the top of the vacuum

tape located

	below the	dust	Handle
			Screw
	covedlilter	cover
__			Hole
	Remove the
	on the motor

• _\ _.-_.._	_,	., case
end to nozzle	as	',
shown

HANDLE ASSEMBLY

Remove the screw iocated just below the top edge of the back of the vacuum

Insert the screw so it passes through the handle into the vacuum

Begin to tighten the screw with your fingers It may be necessary to adjust the handle slightly.