TO STORE ATTACHMENTS
Remove dusting brush or combination brush, Snap into appropriate storage loca- tion,
Remove crevice tool from the wand by twist- ing. Lay aside,
Remove the extension wand from the hose Twist the wand to the left and pull from the hose end,,
Upper
Wand
Unlock the wand by turning the wand lock- ing ring to the UNLOCK position,,
Slide the lower wand into the upper wand, Turn the wand locking ring to the LOCK position,
Place the crevice tool down into the com-
pressed wand, Snap into the appropriate storage location,
Reinsert the hose fully into the opening on the lower body from which it was removed, Press firmly to assure connection,
Personal Injury Hazard
The agitator may begin rotating when the hose is inserted. Ensure that the agitator is clear of all hands, feet, objects, etc.
i iiiii | i]1 | iii |
CAUTION
DO NOT pull the vacuum cleaner around the room by the hose.
Property damage could result.
ii i iiiiii | i i,i]1 |
EXTENSION HOSE
SOME MODELS
Some models include an extra hose which connects to the stretch hose on the vacuum
for a longer cleaning reach,
Unit Hose | _ | Extension Hose |
Insert the two tabs on the end of the
extension hose into the two "J" shaped slots on the unit hose and twist to connect°
All attachments and the telescoping wand can be attached to the open end of the hose.
FLOOR BRUSH AND WAND:
SOME MODELS
Some models have an extra brush and wand for cleaning bare floors, Twist one end of the adaptor into the floor brush and the other end into the straight wand. Connect the straight wand to the telescopic wand and then to the vacuum hose or extension hose.
Wand
CAUTION
When using the regular hose or with the extension hose attached, the cleaner should be on a solid surface on the same level or below the level of the user's feet. DO NOT use the hoses when the cleaner is above the level of the user's feet.
i | i iiiiii I iii | i ii]11111 | i |
o_
a
J
S
l
'10
