Check motor safety filter frequently and
change when dirty
WARNING
Electrical Shock Hazard
Unplug power cord from electrical outlet. Do not operate the cleaner without the motor safety filter. Be sure the filter is dry and properly installed to prevent motor failure and/or electrical shock.
Remove the dust bag as outlined in the DUST BAG CHANGING section.
MOTOR SAFETY FILTER
ELECTROSTATIC
1.This white & grey filter must be
replaced when dirt_ it should be replaced regularly depending on use conditions. The filter CANNOT be washed as it will lose its dust trap- ping ability.
Note: See PARTS AND FEATURES for motor safety filter number.
EXHAUST FILTER
HEPA
Do notw.,,.RNiNGoperate without exhaust I
filter.
The exhaust filter cartridge must be replaced when dirty. It should be replaced regularly depending on use conditions The filter CANNOT be washed as it will lose
its dust trapping ability.
Note: See PARTS AND FEATURES for the
exhaust | filter number_ |
| ||
Slide | the exhaust |
|
| |
filter | cover | Cover |
| |
release | down° |
|
| |
Pull out | on | ExhaustFilter | j | |
|
| |||
exhaust | filter | Exhaust |
| |
cover | to | remove |
| |
from | bag cover. |
| ||
Filter Cover1_ |
|
Remove the exhaust filter car-
tridge from the bag cover°
Motor
Safety
Filter
2.If the filter, locat- ed in the bottom of
the bag cavity, is dirty, remove it by pulling forward out
Replace the exhaust filter cartridge, care- fully positioning it so
Bag
3.Replace the filter, white side up, by sliding it back into place under the ribs in
the bag cavity.
Replace the bag
BAG CHANGING
from under the ribs.
Motor
Safety ,_",_t]A\'r_
as outlined in the DUST section°
that it fits into the bag Exhaust cover The grey edge
of the filter should be facing away from the operator. Push only on filter cartridge frame, not on filter itself.
E,ha°stFi,tor LL!/ Replace the
exhaust filter cover and secure the latch by push- ing it upward.