%!&'
| |
| |
FDDI-TP | Category 5 unshielded twisted-pair (UTP) or Category 5 |
(single-attached) | sheath-shielded, 100-ohm twisted-pair (TP) cable with a |
| TP-MIC plug.* |
| RJ45 connector. |
FDDI fiber | Duplex 62.5/125 micron or 50/125 micron multimode |
(single-attached or | fiber optic cable with SC connectors. |
dual-attached) | Duplex SC connector. |
|
| |
*Do not exceed the maximum cable length specifications in the appropriate FDDI ANSI standard.
&'((#
To connect the filer to a single-attachment FDDI network, use a single-attached FDDI-TP or fiber card to push the cable connector into the card’s connector until it clicks and locks into place. You can connect to an FDDI single-attachment station or concentrator. Figure 2 shows a duplex FDDI fiber optic cable connecting to a single- attached FDDI fiber card.
duplex FDDI fiber optic cable
!"#
$!
You can also use a dual-attached FDDI fiber card with a single-attachment FDDI net- work. Push the cable connector into the card’s top connector (port B) until it clicks and locks into place. Leave the card’s bottom connector unused.
22 Dell PowerVault 7x0N Systems — Connecting to ATM and FDDI Networks
