Manuals / Fujitsu / Computer Equipment / Personal Computer

Fujitsu 500 Insert the expansion card into the slot, Install the mounting bracket, Point

Models: 500

1 80

Download 80 pages 19.87 Kb

Page 54

5Insert the expansion card into the slot.

5Insert the expansion card into the slot.

Insert the expansion card into the slot, and secure it with the screw removed in step 4.

6Install the mounting bracket.

Install the reinforcement bracket to the three stoppers on the PC unit.

Stopper

7 Reinstall the upper cover.

Point

•For removal, use the installation procedure in the reverse order.

8Plug the PC.

9Turn on the PC.

• Windows Me/98/95/2000 models

The system configures the device driver and resource to enable the expansion card.

Point

•The device drivers automatically selected by Plug & Play are those included in Windows Me/ 98/95/2000. The device drivers for some expansion cards or peripheral devices may not be included in these operating systems. If so, use a CD-ROM containing the device driver sup- plied with the expansion card and install it by following the messages.

•Before using the installed expansion card, use Device Manager to check whether the device driver is installed. If not, delete the device driver and then reboot Windows Me/98/95/2000.

•Windows NT models

Configure the device driver for the expansion card.

Refer to the manual for the expansion card. Once the device driver is configured, the expansion card is enabled.

43

Image 54

Fujitsu 500 Insert the expansion card into the slot, Install the mounting bracket, Reinstall the upper cover, Point

Contents

DESKPOWER 5000 Series User’s Manual IMPORTANT SAFETY INSTRUCTIONS Page For Safe Operations Safety product applicationsBefore Starting Your PC CautionsPoint Symbols used in the textConventions used in this manual Warning messagesdiskcopy a a Command entry from keyboardCD-ROM drive¥setup.exe Sample screens IllustrationsDESKPOWER Warning and caution labelsRear surface of the equipment FUJITSU LIMITEDChapter 1 Introduction Manual configurationChapter 3 Troubleshooting Chapter 2 HardwareUsing the mouse ContentCHAPTER 1 Introduction InstallationHardware TroubleshootingCHAPTER Technical InformationSound specifications PC unit specificationsLAN adapter specifications Graphical specificationsCHAPTER Introduction 1 Part Names and Functions Front of the PC unit3 Hard disk access lamp 1 Power lamp2 Power switch 6 Floppy disk drive access lampRear of the PC unit 11 CRT connector 8 Keyboard connector Connect the keyboard 9 Serial connector10 Parallel connector 12 DVI connector1 Internal hard disk drive 3 Power supply unit 4 3.5-inch front access bayInside the PC unit 2 Expansion card slots6 Internal battery 3 Floppy disk drive connector FDD 4 Secondary IDE connector IDE25 Primary IDE connector IDE1 Motherboard1 Esc escape key 7 Indicators2 Keyboard 2 F function keys10 Windows key 8 Caps Lock/Alphanumeric key9 Ctrl control key 11 Alt key3 Mouse Using the mouseUsing the mouse buttons Moving the mouseDragging Double-clickingPointing PointVertical placement 4 InstallationInstallation area Using two feet2 Mount the disassembled foot on the PC unit Using one foot2 Mount the feet on the PC unit 1 Disassemble the feet. Remove the screw from the feet2 Place the PC unit on the disassembled feet Horizontal placement1 Disassemble the feet PointHorizontal placement Example of installationVertical placement Point5 Connection 2 Connect the power cable to the display Connecting the display, keyboard, mouse, and LAN cables Point1 Connect the power cable to the outlet 3 Connect the mouse6 Connect the LAN cable 4 Connect the keyboard5 Connect the display cable to the PC unit 7 Connect the LAN cable to the networkConnecting the power cable 2 Connect the power cable plug to an outlet 6 Turning On the Power CautionsTurning on the power 1 Press the power switch on the display2 Press the power switch on the PC 2 Select Shutdown and click OK. The power is turned off 7 Turning Off the Power SupplyTurning off the power Windows MeWindows NT Windows 98/95Windows 2 Select Shutdown and click OK. The power is turned off2 Select Restart and click OK. The PC is restarted 8 RestartingRestarting the PC 2 Click Restart, then click OK. The PC is restartedPoint 2 Click Restart the computer, then click Yes. The PC is restartedPoint WindowsNotes on handling Notes on using the drive9 CD-ROM Notes on handling CDsRemoving the CD Inserting or removing a CDInserting a CD 1 Press the Eject buttonInserting a floppy disk 10 Floppy DiskInserting or removing a floppy disk Point Notes on handling2 Press the Floppy disk eject button. The floppy disk comes out 1 Confirm that the Floppy disk access lamp is offRemoving the floppy disk PointCHAPTER Hardware 1 Before Installing a Peripheral Device When installing a peripheral device, note the following Notes on handling2 Remove the upper cover 2 Removing the CoverRemoving the upper cover PointRemoving the reinforcement bracket PointLift the reinforcement bracket and move it to the front of the PC unit for removal 3 Installing Memory Modules PointMemory module installation procedure Location of memory modulesApplicable memory modules 1 Unplug the PC 2 Remove the upper cover Installing Memory ModulesMemory module combinations 3 Remove the reinforcement bracket6 Reinstall the reinforcement bracket 7 Reinstall the upper cover 5 Insert a memory module into the slotPoint 4 Installing an Expansion Card PointLocation of expansion cards Applicable expansion cards4 Remove the slot cover Installing an Expansion Card3 Remove the mounting bracket Point5 Insert the expansion card into the slot 6 Install the mounting bracket7 Reinstall the upper cover 8 Plug the PC 9 Turn on the PC Windows Me/98/95/2000 models5 Installing an Internal Option Location of internal optionsCautions Cautions Installing an Internal Hard Disk DriveInstalling a device in the 3.5-inch front access bay Point3 Unplug the PC 4 Remove the upper cover Installing Other Internal Options1 Make a setting on the option to be installed 5 Remove the reinforcement bracket 6 Remove the blank panel8 Install the internal option on the PC unit PointPoint 9 Connect the flat cable 10 Connect the power cable 11 Reinstall the reinforcement bracket 12 Reinstall the upper coverPoint CHAPTER Troubleshooting Nothing is displayed on the screen 1 ProblemsAn access lamp stays off The screen swaysThe mouse cursor does not move Characters entered using the keyboard are not displayedData cannot be read from the CD-ROM drive Windows Me/98/95CHAPTER Technical Information Maintenance of the keyboard 1 Maintenance of the HardwareMaintenance of the PC unit Cleaning CDs2 Remove the ball and clean it with water Maintenance of the mouseCleaning the floppy disk drive 3 Clean the inside of the mouseUSB Windows Me/98/95/2000 models 2 Additional CautionsPreventing Television or Radio Interference Notes concerning the PCCautions on using an analog display Cautions on using a displayCautions on using a digital display USB keyboard Windows 98 models1 Set the resolution to 640 x 480 before replacing the display Power-saving function of displayConnecting the display 3 Reinstall the display driver1 Start Windows from Enable the VGA mode Power-saving function1 Set the resolution to 640 x 480 and the number of colors to 2 Reinstall the display driver3 Hardware Specifications PC unit specificationsProduct name Point LAN adapter specificationsPower supply/frequency PointConnector specifications Sound specificationsGraphical specifications CRT connectorDVI connector LAN connector 100BASE-TX/10BASE-T Parallel connectorSerial connector Mouse connectorKeyboard connector USB connectorIndex Power-saving connectorUSB connector