Fujitsu 500 user manual Connect the power cable

10Connect the power cable.

Connect a power cable to the connector on the installed internal option.

11Reinstall the reinforcement bracket.

12Reinstall the upper cover.

When necessary, remove the blank panel of the 3.5-inch front access bay from the back of the upper cover as shown by the arrow in the figure.

Do not remove the blank panel when installing a hard disk drive.

Stopper Press down to remove

￿Point

•For removal, use the installation procedure in the reverse order.

•After installing a hard disk drive or magneto-optical disk drive, take the following steps to con- figure the disk drive.

-Windows Me/98/95 models

When you have installed a hard disk drive, from MS-DOS prompt on the Start menu, use the FDISK command to configure sectors. Then, format the additional hard disk from My Com- puter.

-Windows 2000 models

When you have installed a hard disk drive, configure sectors and format the disk by using Administrate the Disk. Administrate the Disk is under the Storage Area displayed by clicking the [Start] button, [Program], then [Administrate the Computer].

-Windows NT models

When you have installed a hard disc drive, configure sectors and format the disk by using Disk Administrator. Disk Administrator is activated by clicking the [Start] button, [Program], then [Administration tools].

•Keep the removed brackets.

50