Fujitsu 500 Power lamp, Power switch, Hard disk access lamp, Floppy disk eject button, Volume

1Power lamp

This lamp lights up when the PC is on.

It lights up in green when the PC is in operation and in orange when the PC is in the standby (power- saving) mode.

2Power switch

Press this switch to turn on the PC or set the system to the standby mode.

3Hard disk access lamp

This lamp lights up while the hard disk is accessed.

4Floppy disk eject button

Press this button to remove a floppy disk from the floppy disk drive. Do not press this button when the Floppy disk drive access lamp is on.

5Floppy disk drive

This drive accommodates a floppy disk for writing and reading data.

6Floppy disk drive access lamp

This lamp lights up while the floppy disk drive is accessed.

7Volume

Use this control to adjust the volume of the speaker or headphones.

Turn this control upward to increase or downward to decrease the volume.

8Headphone jack

When listening to sound output from the PC or a music CD with headphones, plug them to this jack.

9Microphone jack

Plug a capacitor microphone to this jack.

10USB connector

11Eject button

Press this button to insert or remove a CD-ROM or music CD. This button can be used when the PC is on. Do not press this button when the Busy lamp is on.

12CD-ROM drive

Insert a CD-ROM into this drive to read data or programs, or insert a music CD for playback.

13Busy lamp

This lamp lights up while data is read from the CD-ROM drive or a music CD is played.

14Headphone volume (only for music CDs)

Use this control to adjust the volume of headphones.

15Headphone jack (only for music CDs)

When listening to a music CD with headphones, plug them to this jack.

16Front access bay

Use this bay to install an optional 3.5-inch device.

17Smart Card bay

Use this bay to install a Smart Card reader/writer.

18Foot

Used for placing the PC.

This also prevents the PC in a vertical placement from tipping over.

3