Installing an Internal Hard Disk Drive

This section explains how to install a second internal hard disk drive to your PC.

Cautions

To prevent faults, note the following.

Data is read from the hard disk drive or written to it while the internal disk that stores data is rotating at high speeds. Since it is a very delicate device, do not carry the PC with the power on or do not apply shock or vibration to the PC.

Do not use or store the hard disk drive in an area where temperature changes sharply in an extremely wide range.

Do not place the hard disk drive in an area exposed to direct sunlight or near a heater.

Do not use or store the hard disk drive in an area subjected to shock or vibration.

Do not use or store the hard disk drive in a humid or dusty area.

Do not use or store the hard disk drive near a magnet or device that generates a strong magnetic field.

Do not disassemble or break down the hard disk drive.

Keep the hard disk drive free from condensation or moisture.

￿Point

Improper handling may damage the data stored on the disk. Always make backup copies of important data.

Even hard disks of the same type have different capacities. It is recommended to back up data not in units of hard disks but in units of files or sectors.

Installing a device in the 3.5-inch front access bay

In installing the hard disk drive in the front access bay, see “Installing Other Internal Options”.

46

Page 57
Image 57
Fujitsu 500 user manual Installing an Internal Hard Disk Drive, Installing a device in the 3.5-inch front access bay