Fujitsu 500 Installing Other Internal Options, Make a setting on the option to be installed

Installing Other Internal Options

Installing a device in the 3.5-inch front access bay

This section explains how to install an internal option such as a 3.5-inch hard disk drive or magneto- optical disk drive to your PC. Here is an example of installing a magneto-optical disk drive.

1Make a setting on the option to be installed.

Refer to the manual for the option and make a Master/Slave/Cable Select setting.

2If brackets are attached to both sides of the internal option to be installed, remove the brackets.

Remove the four screws to remove the brackets.

3Unplug the PC.

4Remove the upper cover.

5Remove the reinforcement bracket.

6Remove the blank panel.

47