Manuals / Fujitsu / Computer Equipment / Personal Computer

Fujitsu 500 Click Restart the computer, then click Yes. The PC is restarted, Point, Windows

Models: 500

1 80

Download 80 pages 19.87 Kb

Page 37

Image 37

2Click [Restart the computer], then click [Yes]. The PC is restarted.

Windows 2000

1Click the [Start] button, then click [Shut down]. The [Shut down Windows] dialog box appears.

2Select [Restart] and click [OK]. The PC is restarted.

Point

•The PC can be restarted in the following procedure.

1 Press the [Ctrl] + [Alt] + [Delete] keys.

The [Windows security] dialog box appears.

2Click [Shutdown].

The [Shut down Windows] dialog box appears.

3Select [Restart] and click [OK]. The PC is restarted.

Windows NT

1Click the [Start] button, then click [Shut down]. The [Shut down Windows] dialog box appears.

2Click [Restart the computer], then click [Yes]. The PC is restarted.

Point

•The PC can be restarted in the following procedure.

1Press the [Ctrl] + [Alt] + [Delete] keys.

The [Windows NT security] dialog box appears.

2Click [Shutdown].

The [Computer shutdown] dialog box appears.

3Click [Shut down and reboot], then click [OK]. The PC is restarted.

Page 37

Image 37

Fujitsu 500 user manual Click Restart the computer, then click Yes. The PC is restarted, Point, Windows NT

Contents

DESKPOWER 5000 Series User’s Manual IMPORTANT SAFETY INSTRUCTIONS Page Before Starting Your PC Safety product applicationsFor Safe Operations CautionsConventions used in this manual Symbols used in the textPoint Warning messagesCD-ROM drive¥setup.exe Sample screens Command entry from keyboarddiskcopy a a IllustrationsRear surface of the equipment Warning and caution labelsDESKPOWER FUJITSU LIMITEDChapter 3 Troubleshooting Manual configurationChapter 1 Introduction Chapter 2 HardwareCHAPTER 1 Introduction ContentUsing the mouse InstallationCHAPTER TroubleshootingHardware Technical InformationLAN adapter specifications PC unit specificationsSound specifications Graphical specificationsCHAPTER Introduction Front of the PC unit 1 Part Names and Functions2 Power switch 1 Power lamp3 Hard disk access lamp 6 Floppy disk drive access lampRear of the PC unit 10 Parallel connector 8 Keyboard connector Connect the keyboard 9 Serial connector11 CRT connector 12 DVI connectorInside the PC unit 3 Power supply unit 4 3.5-inch front access bay1 Internal hard disk drive 2 Expansion card slots5 Primary IDE connector IDE1 3 Floppy disk drive connector FDD 4 Secondary IDE connector IDE26 Internal battery Motherboard2 Keyboard 7 Indicators1 Esc escape key 2 F function keys9 Ctrl control key 8 Caps Lock/Alphanumeric key10 Windows key 11 Alt keyUsing the mouse buttons Using the mouse3 Mouse Moving the mousePointing Double-clickingDragging PointInstallation area 4 InstallationVertical placement Using two feet2 Mount the feet on the PC unit Using one foot2 Mount the disassembled foot on the PC unit 1 Disassemble the feet. Remove the screw from the feet1 Disassemble the feet Horizontal placement2 Place the PC unit on the disassembled feet PointVertical placement Example of installationHorizontal placement Point5 Connection 1 Connect the power cable to the outlet Connecting the display, keyboard, mouse, and LAN cables Point2 Connect the power cable to the display 3 Connect the mouse5 Connect the display cable to the PC unit 4 Connect the keyboard6 Connect the LAN cable 7 Connect the LAN cable to the networkConnecting the power cable 2 Connect the power cable plug to an outlet Cautions 6 Turning On the Power1 Press the power switch on the display Turning on the power2 Press the power switch on the PC Turning off the power 7 Turning Off the Power Supply2 Select Shutdown and click OK. The power is turned off Windows MeWindows Windows 98/95Windows NT 2 Select Shutdown and click OK. The power is turned offRestarting the PC 8 Restarting2 Select Restart and click OK. The PC is restarted 2 Click Restart, then click OK. The PC is restartedPoint 2 Click Restart the computer, then click Yes. The PC is restartedPoint Windows9 CD-ROM Notes on using the driveNotes on handling Notes on handling CDsInserting a CD Inserting or removing a CDRemoving the CD 1 Press the Eject buttonInserting or removing a floppy disk Point 10 Floppy DiskInserting a floppy disk Notes on handlingRemoving the floppy disk 1 Confirm that the Floppy disk access lamp is off2 Press the Floppy disk eject button. The floppy disk comes out PointCHAPTER Hardware 1 Before Installing a Peripheral Device Notes on handling When installing a peripheral device, note the followingRemoving the upper cover 2 Removing the Cover2 Remove the upper cover PointPoint Removing the reinforcement bracketLift the reinforcement bracket and move it to the front of the PC unit for removal Point 3 Installing Memory ModulesLocation of memory modules Memory module installation procedureApplicable memory modules Memory module combinations Installing Memory Modules1 Unplug the PC 2 Remove the upper cover 3 Remove the reinforcement bracket5 Insert a memory module into the slot 6 Reinstall the reinforcement bracket 7 Reinstall the upper coverPoint Point 4 Installing an Expansion CardApplicable expansion cards Location of expansion cards3 Remove the mounting bracket Installing an Expansion Card4 Remove the slot cover Point7 Reinstall the upper cover 6 Install the mounting bracket5 Insert the expansion card into the slot 8 Plug the PC 9 Turn on the PC Windows Me/98/95/2000 modelsLocation of internal options 5 Installing an Internal OptionCautions Installing a device in the 3.5-inch front access bay Installing an Internal Hard Disk DriveCautions Point1 Make a setting on the option to be installed Installing Other Internal Options3 Unplug the PC 4 Remove the upper cover 5 Remove the reinforcement bracket 6 Remove the blank panelPoint 8 Install the internal option on the PC unitPoint 9 Connect the flat cable 11 Reinstall the reinforcement bracket 12 Reinstall the upper cover 10 Connect the power cablePoint CHAPTER Troubleshooting An access lamp stays off 1 ProblemsNothing is displayed on the screen The screen swaysData cannot be read from the CD-ROM drive Characters entered using the keyboard are not displayedThe mouse cursor does not move Windows Me/98/95CHAPTER Technical Information Maintenance of the PC unit 1 Maintenance of the HardwareMaintenance of the keyboard Cleaning CDsCleaning the floppy disk drive Maintenance of the mouse2 Remove the ball and clean it with water 3 Clean the inside of the mousePreventing Television or Radio Interference 2 Additional CautionsUSB Windows Me/98/95/2000 models Notes concerning the PCCautions on using a digital display Cautions on using a displayCautions on using an analog display USB keyboard Windows 98 modelsConnecting the display Power-saving function of display1 Set the resolution to 640 x 480 before replacing the display 3 Reinstall the display driver1 Set the resolution to 640 x 480 and the number of colors to Power-saving function1 Start Windows from Enable the VGA mode 2 Reinstall the display driverPC unit specifications 3 Hardware SpecificationsProduct name Power supply/frequency LAN adapter specificationsPoint PointGraphical specifications Sound specificationsConnector specifications CRT connectorDVI connector Parallel connector LAN connector 100BASE-TX/10BASE-TMouse connector Serial connectorUSB connector Keyboard connectorIndex connector Power-savingUSB connector