Manuals / Fujitsu / Computer Equipment / Personal Computer

Fujitsu 500 Venthole, Outlet, Burglarproof lock, Upper knob, Expansion card slots, Inlet, Point

Models: 500

1 80

Download 80 pages 19.87 Kb

Page 16

1Venthole

An opening provided to let heat go out of the PC.

2Outlet

Connect the power cable of the display to this outlet.

3Burglarproof lock

A commercial burglarproof cable can be connected here.

Point

•The burglarproof lock supports the Microsaver security system of Kensington.

4Upper knob

This locks the upper cover.

5Expansion card slots

Insert an expansion card to this slot. This slot accommodates a PCI card.

6Inlet

Connect the power cable of the PC unit to this connector.

7Mouse connector Connect a mouse.

8Keyboard connector Connect the keyboard.

9Serial connector

Connect the cable of an RS-232C device.

10Parallel connector

Connect the cable of a printer or scanner.

11CRT connector

Connect the cable of an analog RGB display.

12DVI connector

Connect the cable of a DVI display.

13LAN connector Connect the LAN cable.

14USB connector

15LINE IN terminal

A terminal for sound input. Connect the output terminal of audio equipment to this terminal.

16LINE OUT terminal

A terminal for sound output. Connect the input terminal of audio equipment to this terminal. When connecting speakers, use those with a built-in amplifier.

5

Image 16

Fujitsu 500 Venthole, Outlet, Burglarproof lock, Upper knob, Expansion card slots, Inlet, Parallel connector, Point

Contents

DESKPOWER 5000 Series User’s Manual IMPORTANT SAFETY INSTRUCTIONS Page Safety product applications Before Starting Your PCFor Safe Operations CautionsSymbols used in the text Conventions used in this manualPoint Warning messagesCommand entry from keyboard CD-ROM drive¥setup.exe Sample screensdiskcopy a a IllustrationsWarning and caution labels Rear surface of the equipmentDESKPOWER FUJITSU LIMITEDManual configuration Chapter 3 TroubleshootingChapter 1 Introduction Chapter 2 HardwareContent CHAPTER 1 IntroductionUsing the mouse InstallationTroubleshooting CHAPTERHardware Technical InformationPC unit specifications LAN adapter specificationsSound specifications Graphical specificationsCHAPTER Introduction 1 Part Names and Functions Front of the PC unit1 Power lamp 2 Power switch3 Hard disk access lamp 6 Floppy disk drive access lampRear of the PC unit 8 Keyboard connector Connect the keyboard 9 Serial connector 10 Parallel connector11 CRT connector 12 DVI connector3 Power supply unit 4 3.5-inch front access bay Inside the PC unit1 Internal hard disk drive 2 Expansion card slots3 Floppy disk drive connector FDD 4 Secondary IDE connector IDE2 5 Primary IDE connector IDE16 Internal battery Motherboard7 Indicators 2 Keyboard1 Esc escape key 2 F function keys8 Caps Lock/Alphanumeric key 9 Ctrl control key10 Windows key 11 Alt keyUsing the mouse Using the mouse buttons3 Mouse Moving the mouseDouble-clicking PointingDragging Point4 Installation Installation areaVertical placement Using two feetUsing one foot 2 Mount the feet on the PC unit2 Mount the disassembled foot on the PC unit 1 Disassemble the feet. Remove the screw from the feetHorizontal placement 1 Disassemble the feet2 Place the PC unit on the disassembled feet PointExample of installation Vertical placementHorizontal placement Point5 Connection Connecting the display, keyboard, mouse, and LAN cables Point 1 Connect the power cable to the outlet2 Connect the power cable to the display 3 Connect the mouse4 Connect the keyboard 5 Connect the display cable to the PC unit6 Connect the LAN cable 7 Connect the LAN cable to the networkConnecting the power cable 2 Connect the power cable plug to an outlet 6 Turning On the Power Cautions1 Press the power switch on the display Turning on the power2 Press the power switch on the PC 7 Turning Off the Power Supply Turning off the power2 Select Shutdown and click OK. The power is turned off Windows MeWindows 98/95 WindowsWindows NT 2 Select Shutdown and click OK. The power is turned off8 Restarting Restarting the PC2 Select Restart and click OK. The PC is restarted 2 Click Restart, then click OK. The PC is restarted2 Click Restart the computer, then click Yes. The PC is restarted PointPoint WindowsNotes on using the drive 9 CD-ROMNotes on handling Notes on handling CDsInserting or removing a CD Inserting a CDRemoving the CD 1 Press the Eject button10 Floppy Disk Inserting or removing a floppy disk PointInserting a floppy disk Notes on handling1 Confirm that the Floppy disk access lamp is off Removing the floppy disk2 Press the Floppy disk eject button. The floppy disk comes out PointCHAPTER Hardware 1 Before Installing a Peripheral Device When installing a peripheral device, note the following Notes on handling2 Removing the Cover Removing the upper cover2 Remove the upper cover PointPoint Removing the reinforcement bracketLift the reinforcement bracket and move it to the front of the PC unit for removal 3 Installing Memory Modules PointLocation of memory modules Memory module installation procedureApplicable memory modules Installing Memory Modules Memory module combinations1 Unplug the PC 2 Remove the upper cover 3 Remove the reinforcement bracket5 Insert a memory module into the slot 6 Reinstall the reinforcement bracket 7 Reinstall the upper coverPoint 4 Installing an Expansion Card PointLocation of expansion cards Applicable expansion cardsInstalling an Expansion Card 3 Remove the mounting bracket4 Remove the slot cover Point6 Install the mounting bracket 7 Reinstall the upper cover5 Insert the expansion card into the slot 8 Plug the PC 9 Turn on the PC Windows Me/98/95/2000 models5 Installing an Internal Option Location of internal optionsCautions Installing an Internal Hard Disk Drive Installing a device in the 3.5-inch front access bayCautions PointInstalling Other Internal Options 1 Make a setting on the option to be installed3 Unplug the PC 4 Remove the upper cover 5 Remove the reinforcement bracket 6 Remove the blank panelPoint 8 Install the internal option on the PC unitPoint 9 Connect the flat cable 11 Reinstall the reinforcement bracket 12 Reinstall the upper cover 10 Connect the power cablePoint CHAPTER Troubleshooting 1 Problems An access lamp stays offNothing is displayed on the screen The screen swaysCharacters entered using the keyboard are not displayed Data cannot be read from the CD-ROM driveThe mouse cursor does not move Windows Me/98/95CHAPTER Technical Information 1 Maintenance of the Hardware Maintenance of the PC unitMaintenance of the keyboard Cleaning CDsMaintenance of the mouse Cleaning the floppy disk drive2 Remove the ball and clean it with water 3 Clean the inside of the mouse2 Additional Cautions Preventing Television or Radio InterferenceUSB Windows Me/98/95/2000 models Notes concerning the PCCautions on using a display Cautions on using a digital displayCautions on using an analog display USB keyboard Windows 98 modelsPower-saving function of display Connecting the display1 Set the resolution to 640 x 480 before replacing the display 3 Reinstall the display driverPower-saving function 1 Set the resolution to 640 x 480 and the number of colors to1 Start Windows from Enable the VGA mode 2 Reinstall the display driverPC unit specifications 3 Hardware SpecificationsProduct name LAN adapter specifications Power supply/frequencyPoint PointSound specifications Graphical specificationsConnector specifications CRT connectorDVI connector LAN connector 100BASE-TX/10BASE-T Parallel connectorSerial connector Mouse connectorKeyboard connector USB connectorIndex connector Power-savingUSB connector