Dell Axim Scan, Axim, Scan, Scan, Red LED, Discoverable, New Connection, New Connection, Wireless keyboard

5.Before starting the scan make sure the keyboard is Discoverable by the Pocket PC device. To do this, press the <Ctrl> Left <Fn> Right <Fn> keys together on the keyboard until the green LED flashes (~ 1 second). Then tap the Scan button on the screen.

4.The New Connection window is used to connect the Pocket PC device to the Axim™ Wireless keyboard. Tap New Connection to begin the process.

6.Wait until the Axim™ Wireless keyboard appears in the list. If the keyboard does not show up:

a.Try pressing the <Ctrl> Left <Fn> Right <Fn> keys together on the keyboard and tapping the Scan button on the screen again.

b.Or, power cycle the keyboard (close and reopen), then press <Ctrl> Left <Fn> Right <Fn> and tap Scan again.

c.If neither of the above steps work, check that the Red LED on the keyboard is not lit after a power cycle indicating a dead battery condition.

Axim™ Wireless Keyboard Owner’s Manual Page 5