10.If you choose a secure connection by checking the Secure box, the Pocket PC Bluetooth system software will prompt you for a passkey. You are likely to see the Bluetooth Passkey dialog shown here, but this is variable by device. Enter a passkey using the Pocket PC on-screen keyboard, then tap

OK in the top right corner of the window. Type the same passkey number on the AximWireless keyboard, using Left <Fn> + <Number> keys. When finished, press the <Enter> key.

NOTE: The passkey must contain only digits, for example 1234.

11.If the passkey is not entered correctly, the connection will fail. In this case you will need to press the <Ctrl> Left <Fn> Right <Fn> keys together on the keyboard and tap Connect again.

NOTE: Please, make sure that the passkey is entered on-screen first, tap OK and then follow with the passkey on the keyboard. When finished, press the <Enter> key on the keyboard.

12.If the connection process is successful, the Secure keyboard connection enabled message will display on the Pocket PC device. This is the normal

mode for wireless communication between the AximWireless keyboard and the Pocket PC device during use.

AximWireless Keyboard Owner’s Manual

Page 7