Controls And Connectors

Connecting the Signal Cable: Plug the Signal Cable one end to LCD monitor’s “DSUB-Input” socket , the other end to the computer’s VGA port and tighten the two screws on the cable connector.

Connecting the DVI Cable : Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer's DVI port.

Connecting the Power Cord: Connect one end of the AC power cord to the LCD monitor's AC input socket, and the other end to wall outlet.

Caution: If the AC outlet is not grounded (with three holes), install the proper grounding adapter (not supplied).

1

3

2

Figure 2 Connecting Cables

1.Power Cable

2.Signal Cable

3.DVI Cable (option)

5

Page 7
Image 7
Dell D2201R user manual Controls And Connectors, Connecting Cables Power Cable Signal Cable DVI Cable option