118 Adding and Replacing Parts
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching a connector on the back panel of the computer.
NOTICE: To prevent damage to the system board, remove the main battery before you service the computer.
If you ordered an internal card with Bluetooth wireless technology with your computer, it is already
installed.
1
Follow the procedures in "Before You Begin" on page 103.
2
Remove the keyboard (see "Mini-Cards" on page113).
3
Remove the M2 x 3-mm screw from the card holder and lay the holder aside.
4Lift the card away from the aligning pin.
5Disconnect the card cable connector from the card.
NOTICE: Be careful when removing the card to avoid damaging the card, card cable, or surrounding components.
Coin-Cell Battery
CAUTION: Before performing the following procedures, follow the safety instructions in your
Product
Information Guide
.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching a connector on the back panel of the computer.
NOTICE: To prevent damage to the system board, remove the main battery before you service the computer.
1internal card with Bluetooth
wireless technology
2card cable connector 3M2 x 3-mm screw
4card holder 5aligning pin
2
1
3
5
4