116 Adding and Replacing Parts
NOTICE: To prevent damage to the connector, do not use tools to spread the securing clips.
b
Use your fingertips to carefully spread apart the metal securing tabs until the card pops up slightly.
c
Slide and lift the
Mobile Broadband card
out of its connector.
NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and
realign the card.
NOTE: Do not insert a WLAN card into the Mobile Broadband card slot.
2
To install a
Mobile Broadband card
:
a
Move any antenna cables out of the way to make space for the
card
.
NOTICE: To avoid damaging the Mobile Broadband card, never place cables on top of or under the card and
ensure that you route the cables properly.
NOTE: Cable routing for the Mobile Broadband card may vary.
b
Align the
card
with the connector at a 45-degree angle, and press the card into the connector until
you feel a click.
c
Connect the white stripped cable to the connector on the card marked with a white triangle.
d
Connect the black stripped cable to the connector on the card marked with a black triangle.
1Mobile Broadband card 2metal securing tabs (2)
2
1