Back to Contents Page
Center Control Cover
Dell™Latitude™D810ServiceManual
Removing the Center Control Cover

Removing the Center Control Cover

1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Open the display all the way (180 degrees) so that it lies flat against your work surface.
3. Starting on the right side of the computer, use a plastic scribe or flat-blade screw driver to pry up the center control cover.
4. Lift the center control cover away from the computer and lay it aside.
Back to Contents Page
CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1
center control cover