Back to Contents Page
Fan
Dell™Latitude™D810ServiceManual
Removing the Fan

Removing the Fan

1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the center control cover.
3. Remove the display assembly.
4. Remove the keyboard.
5. Remove the palm rest.
6. Remove the M2.5 x 5-mm screw from the top left corner of the fan.
7. Disconnect the fan cable connector.
8. Lift the fan straight up out of the computer.
When replacing the fan, follow the steps in reverse order.
Back to Contents Page
CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1
M2.5 x 5-mm screw