Back to Contents Page
Center Control Cover
Dell™Latitude™D810ServiceManual
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Turn the computer top-side up and open it.
3. Remove the center control cover:
a. Open the display all the way (180 degrees) so that it lies flat against your work surface.
b. Starting on the right side of the computer, use a plastic scribe or flat-blade screw driver to pry up the center control cover.
c. Lift the center control cover away from the computer, and lay it aside.
Back to Contents Page
CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1
center control cover