Back to Contents Page
Coin-Cell Battery
Dell™Latitude™D820ServiceManual
1. Follow the procedures in Before You Begin.
2. Remove the memory module cover (see Memory).
3. Remove the coin-cell battery connector from the connector on the system board.
4. Slide the battery out of the plastic sleeve.
Back to Contents Page
CAUTION: Before performing the following procedures, follow the safety instructions in your Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of
the computer.
NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
1
plastic sleeve
2
coin-cell battery
coin-cell battery connector
4
connector on system board