Using the System Setup Program and UEFI Boot Manager 55
The iDRAC6 Express provides the following additional features in a remote
environment:
• Downloading and applying firmware updates
• Configuring hardware and firmware
For more information about setting up the controller and configuring
hardware and firmware, see the Lifecycle Controller User Guide at
support.dell.com/manuals.
NOTE: To reinstall and deploy the operating system, use the Recovery Manager
solution available for download at support.dell.com.
Baseboard Management Controller Configuration
NOTE: The Baseboard Management Controller (BMC) utility is replaced by the
iDRAC6 utility.
The BMC enables configuring, monitoring, and recovery of systems remotely.
BMC provides the following features:
• Uses the system’s integrated NIC
• Enables fault logging and SNMP alerting
• Provides access to system event log and sensor status
• Allows control of system functions including power on and off
• Functions independently of the system’s power state or the system’s
operating system
• Provides text console redirection for system setup, text-based utilities,
and operating system consoles
NOTE: To remotely access the BMC through the integrated NIC, you must connect
the network connection to integrated NIC1.
For additional information on using BMC, see the documentation for the
BMC and systems management applications.
book.book Page 55 Friday, January 6, 2012 2:11 PM