Dell E198WFP appendix LCD Monitor Quality & Pixel Policy, Electrical, Physical Characteristics

Electrical

The following table lists the monitor electrical features:

Video input signals Synchronization input signals

Analog RGB, 0.7 Volts +/-5%, positive polarity at 75 ohm input impedance

Digital DVI-D TMDS, 600mV for each differential line, positive polarity at 50 ohm input impedance

Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG (Composite SYNC on green)

AC input voltage / frequency / current 100 to 240 VAC / 50 or 60 Hz + 3 Hz / 2.0A (Max.)

Inrush current	120V:30A (Max.)
	240V:60A (Max.)

Physical Characteristics

The following table lists the monitor physical characteristics:

Connector type	15-pin D-subminiature, blue connector; DVI-D, white connector
Signal cable type	Digital: Detachable, DVI-D, Solid pins, shipped detached from the monitor
	Analog: Detachable, D-Sub, 15pins, shipped attached to the monitor
Dimensions (with stand)
Height	14.38 inches (364.85 mm)
Width	17.54 inches (445.09 mm)
Depth	5.67 inches (143.90 mm)
Dimensions: (without stand)
Height	11.46 inches (291.19 mm)
Width	17.54 inches (445.09 mm)
Depth	2.32 inches (59.00 mm)
Stand dimensions:
Height	11.40 inches (289.25 mm)
Width	11.52 inches (292.50 mm)
Depth	5.67 inches (143.90 mm)
Weight with packaging	14.26 lbs (6.47 kg)
Weight with stand assembly and	10.58 lbs (4.8 kg)
cables
Weight without stand assembly
(For wall mount or VESA mount	8.16 lbs (3.7 kg)
considerations - no cables)
Weight of stand assembly	2.14 lbs (0.97 kg)

Environmental

The following table lists the environmental condition for monitor:

Temperature

Operating

Nonoperating

Humidity

Operating

Nonoperating

Altitude

Operating

Nonoperating

Thermal dissipation

5° to 35°C (41° to 95°F)

Storage: -20° to 60°C (-4° to 140°F)

Shipping: -20° to 60°C(-4° to 140°F)

10% to 80% (noncondensing)

Storage: 5% to 90% (noncondensing)

Shipping: 5% to 90%(noncondensing)

3,657.6m (12,000 ft) max 12,192 m (40,000 ft) max

256.08BTU/hour (maximum)

119.5BTU/hour (typical)

LCD Monitor Quality & Pixel Policy

During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pixel that appears as an extremely tiny dark or bright discolored spot.

In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considered normal and within competitive standards. For more information, see Dell Support site at: support.dell.com.