Installing the Palm Rest Assembly
1. Align the palm rest assembly with the computer and gently snap it into
place.
2. Replace and tighten the screws that secure the palm rest assembly to the
system board.
3. Connect the LED, smart card, touchpad, RFID, and ExpressCard cables to
the system board.
4. Replace and tighten the screws that secure the palm rest assembly to the
computer.
5. Install the
Keyboard
.
6. Install the
Keyboard Trim
.
7. Install the
Bluetooth Card
.
8. Install the
WWAN Card
.
9. Install the
Hard Drive
.
10. Install the
Optical Drive
.
11. Install the
Base Cover
.
12. Install the
Secure Digital (SD) Card
.
13. Install the
Battery
.
14. Install the
ATG Port Cover
(only for E6420 ATG systems).
15. Install the
ATG Handle
(only for E6420 ATG systems).
16. Follow the procedures in
After Working Inside Your Computer
.
68