Installing the Modem Connector
1. Place the modem cable assembly into the base.
2. Place the modem cable holder.
3. Tighten the screw securing the modem cable holder.
4. Connect the end of the modem-to-motherboard connector.
5. Route the modem cable.
6. Route the video and wireless antenna cables.
7. Install the
System Board
.
8. Install the
ExpressCard Cage
9. Install the
Palmrest Assembly
.
10. Install the
Modem Card
.
11. Install the
Keyboard
.
12. Install the
Keyboard Trim
.
13. Install the
Bluetooth Card
.
14. Install the
Heat Sink and Processor
.
15. Install the
Coin Cell Battery
.
16. Install the
WWAN Card
.
17. Install the
WLAN Card
.
18. Install the
Hard Drive
.
19. Install the
Memory
.
20. Install the
Optical Drive
.
21. Install the
ExpressCard
.
22. Install the
Modem Connector Plug
.
23. Install the
Base Cover
.
24. Install the
SD Card
.
25. Install the
Battery
.
26. Install the
ATG Port Cover
(only for E6420 ATG systems).
27. Install the
ATG Handle
(only for E6420 ATG systems).
28. Follow the procedures in
After Working Inside Your Computer
.
93