Dell E6420 Installing the Smart Card

Installing the Smart Card
1. Replace the Smart Card Reader in the computer in its original position.
2. Tighten the screws of the Smart Card Reader.
3. Connect the Smart Card Reader cable on the system board.
4. Install the Palmrest Assembly .
5. Install the Keyboard .
6. Install the Keyboard Trim .
7. Install the Hard Drive .
8. Install the Base Cover .
9. Install the SD Card .
10. Install the Battery .
11. Install the ATG Port Cover (only for E6420 ATG systems).
12. Install the ATG Handle (only for E6420 ATG systems).
13. Follow the procedures in After Working Inside Your Computer .
71