5. Remove the screws that secure the palmrest assembly to the front of the computer. Pry the edges and lift the
palmrest assembly from the computer.
Installing the Palmrest
1. Align the palm rest assembly to its original position in the computer and snap it into place.
2. Tighten the screws to secure the palmrest assembly to the front of the computer.
3. Route the touch cable and connect to the system board.
4. Tighten the screws that secure the palmrest assembly to the base of the computer.
5. Install:
a) keyboard
b) keyboard trim
c) base cover
d) battery
e) SD card
6. Follow the procedures in
After Working Inside Your Computer
.
Removing the Wi‐Fi Switch Board
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) SD card
b) battery
c) base cover
17