102 Expansion-Card Cage (Small Desktop Computer Only)
www.dell.com | support.dell.com
Removing the Expansion-Card Cage CAUTION: Use a wrist grounding strap as explained in
"Precautionary Measures."
1Examine any cables connected to expansion cards through the back-
panel openings, and disconnect any cables that will not reach the
expansion-card cage once it is removed from the computer.
2Remove any cables connected to the expansion card.
3Gently pull on the handle and lift the expansion-card cage up and
away from the computer.
Expansion-Card Cage Removal
Replacing the Expansion-Card Cage 1Align the slots in the side of the expansion-card cage with the tabs on
the side of the computer, and slide the expansion-card cage down into
place.
2Make sure that the riser board is fully seated in the RISER connector
on the system board.