72 Drives
www.dell.com | support.dell.com
If your computer came with an IDE CD drive, use the spare connector
on the existing interface cable. Otherwise, use the IDE interface cable
provided in the drive kit.
3If you are installing a drive that has its own controller card, install the
controller card in an expansion slot.
4Check all cable connections, and fold cables out of the way to provide
airflow for the fan and cooling vents.
5If the drive bay was previously empty, remove the front-panel insert
from the front panel.
aRelease the insert tabs from inside the chassis.
bRemove the insert by pressing it until it pops free.
cReplace the front-panel piece by snapping it into place.
Removing the Hard Drive
Small Form-Factor Computer
1Disconnect the power cable and hard-drive cable from the drive.
1Power cable
2Audio cable
3Data cable
4Drive connector