Dell IN2010N appendix Electrical, Physical Characteristics

VGA, 720 x 400	31.469	70.087	28.3	-/+
VGA, 640 x 480	31.469	59.940	25.2	-/-
VGA, 640 x 480	37.500	75.000	31.5	-/-
VESA, 800 x 600	37.879	60.317	40.0	+/+
VESA, 800 x 600	46.875	75.000	49.5	+/+
VESA, 1024 x 768	48.363	60.004	65.0	-/-
VESA, 1024 x 768	60.023	75.029	78.8	+/+
VESA. 1152 x 864	67.500	75.000	108.0	+/+
VESA, 1280 x 1024	64.000	60.000	108.0	+/+
VESA, 1280 x 1024	79.976	75.025	135.0	+/+
CVT, 1600 x 900 - Analog & Digital	55.540	60.000	97.75	+/-

Electrical

Video input signals	Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input
	impedance
Synchronization input signals	Separate horizontal and vertical synchronizations, polarity-free
	TTL level, SOG (Composite SYNC on green)
AC input voltage/frequency/current	100 to 240 VAC/50 or 60 Hz + 3 Hz/2.0A (Max.)
Inrush iso surge current	120 V: 30 A (Max.)
	240 V: 60 A (Max.)

Physical Characteristics

Connector type	•	D-sub: blue connector
	•	D-sub: Detachable, Analog, 15 pin, shipped attached to
Signal cable type		the monitor
Dimensions (with stand)
Height	361.8 mm (14.25 inches)
Width	486.2 mm (19.14 inches)
Depth	219.6 mm (8.65 inches)
Dimensions (without stand)
Height	292.9 mm (11.53 inches)
Width	486.2 mm (19.14 inches)
Depth	59.7 mm (2.35 inches)
Stand dimensions
Height	138.7 mm (5.46 inches)
Width	219.6 mm (8.65 inches)
Depth	219.6 mm (8.65 inches)
Weight
Weight with packaging	5.79 kg (12.75 lb)
Weight with stand assembly and cables	4.638 kg (10.21 lb)
Weight without stand assembly
(for wall mount or VESA mount considerations -	4.14 kg (9.12 lb)
no cables)
Weight of stand assembly	0.358 kg (0.79 lb)