NOTE: *Optional purchase item. To purchase a DVI cable, please visit Dell.com

NOTE: The Graphics are used for the purpose of illustration only. Appearance of the the computer may vary.

After you have completed connecting the VGA/DVI cable, follow the procedure below to complete your monitor setup:

1.Plug the power cables for your computer and monitor into a nearby outlet.

2.Turn on the monitor and the computer.

If your monitor displays an image, installation is complete. If it does not display an image, see Solving Problems.

Attaching the Soundbar (Optional)

1.Working from the rear of the monitor, attach the Soundbar by aligning the two slots with the two tabs along the bottom rear of the monitor.

2.Slide the Soundbar to the left until it snaps into place.

3.Connect the Soundbar with the DC power connector.

4.Insert the mini stereo plug from the rear of the Soundbar into the computer's audio output jack or the monitor's audio output jack.

NOTICE: Do not use with any device other than the Dell Soundbar.

Removing the Monitor Stand

Page 27
Image 27
Dell IN2020MF, IN2020F appendix Attaching the Soundbar Optional, Removing the Monitor Stand