Dell IN2020M appendix Attaching the Soundbar Optional

Dell IN2020/IN2020M Flat Panel Monitor User's Guide

1.Turn off your computer and disconnect the power cable.

2.Connect the white (digital DVI-D), or blue (analog VGA) display connector cable to the corresponding video port on the back of your computer. Do not use all the cables on the same computer. Use all of the cables only when they are connected to different computers with appropriate video systems.

Connecting the blue VGA cable

Connecting the White DVI Cable* (for IN2020M only)

NOTE: *Optional purchase item. To purchase a DVI cable, please visit Dell.com

NOTE: The Graphics are used for the purpose of illustration only. Appearance of the the computer may vary.

After you have completed connecting the VGA/DVI cable, follow the procedure below to complete your monitor setup:

1.Plug the power cables for your computer and monitor into a nearby outlet.

2.Turn on the monitor and the computer.

If your monitor displays an image, installation is complete. If it does not display an image, see Solving Problems.

Attaching the Soundbar (Optional)

file:///C/Users/santhosh_v/Desktop/UG_en/setup.htm[3/27/2013 12:21:01 PM]