Fluke Computer Accessories A tabular report will be generated default, chart, number, true, false

User’s Guide – version 3.5 NetFlow Tracker

output – specifies if a tabular report or chart will be generated.

table	A tabular report will be generated (default)
chart	A chart over time will be generated
pie	A pie chart will be generated

nrecords – specifies the number of rows to show per page of a tabular report.

<number>	The number of rows per page
-1	Show all rows

others – specifies that a tabular report shows an “others” row instead of a page navigator. Note that long-term tabular reports always show an “others” row.

true	An “others” row is shown instead of a page navigator
false	No “others” row is shown (default)

visible – specifies a visible column of a report or chart; this parameter should be specified as many times as is necessary to include all desired columns. By default, all columns are visible.

<heading>	The URL-encoded column heading; note that % is URL-encoded as
	%25
-<heading>	A column to make invisible; parameters specifying invisible columns
	cannot be mixed with those specifying visible columns

nelements – specifies the number of elements to chart.

<number>

The number of elements to chart

chartTitle – specifies the chart to show.

<title>

The chart title

chartWidth – specifies the width of the chart. This parameter can be used as an output parameter in an executive report.

<width>

The chart width in pixels

chartHeight – specifies the height of the chart. This parameter can be used as an output parameter in an executive report.

<height>

The chart height in pixels

40