Fluke Computer Accessories Specifying the chart sample size, minute, Minutes, daily, weekly, hour

User’s Guide – version 3.5 NetFlow Tracker

285	(GMT+12:00)	Fiji, Kamchatka, Marshall Is.
300	(GMT+13:00)	Nuku'alofa

Specifying the chart sample size

When you create a real-time chart the system chooses a sample size that will create as close to 150 samples over the full width of the chart as possible. If you want to you can specify a different sample size to show, for example, a day in hour-long samples or a month in day-long samples.

sample_unit – specifies the unit to measure the sample size in.

minute	Minutes
hour	Hours
day	Days
week	Weeks
month	Months
quarter	Quarters
halfyear	Half-years
year	Years

sample_nunits – specifies the number of units in each sample

1Each sample will be one unit long (default)

<number> Each sample will be this number of units long

Specifying the source long-term data

When you create a long-term chart or tabular report, the source data is chosen so the time range will be in as close to 150 samples as possible. You can override this if you wish.

range – specifies the source long-term data to use

daily	Daily data (ten minute samples) will be used
weekly	Weekly data (one hour samples) will be used
monthly	Monthly data (six hour samples) will be used
quarterly	Quarterly data (twelve hour samples) will be used
halfyearly	Half-yearly data (one-day samples) will be used
yearly	Yearly data (two-day samples) will be used

48