Replacing the Display Back Cover

1.Follow the instructions in “Before You Begin” on page 6.

2.Align the display back cover with the back of the display assembly and slide it into position.

3.Connect the AlienHead cable to the connector.

4.Replace the two screws that secure the display back cover with the display assembly.

5.Slide the display back cover door in place.

6.Turn the display assembly over and replace the two screws that secure the display back cover door to the display assembly.

7.Replace the display assembly (see “Replacing the Display Assembly” on page 56).

8.Replace the magnesium cover (see “Replacing the Magnesium Cover” on page 52).

9.Replace the left and right brackets (see “Replacing the Brackets” on page 47).

10.Replace the palm rest (see “Replacing the Palm Rest” on page 44).

CHAPTER 13: DISPLAY

11.Replace the keyboard (see “Replacing the Keyboard” on page 39).

12.Replace the center control cover (see “Replacing the Center Control Cover” on page 35).

13.Replace the compartment door (see “Replacing the Compartment Door” on page 14).

14.Replace the battery pack (see “Replacing the Battery Pack” on page 11).

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.

059/059

Page 59
Image 59
Dell M17X service manual Replacing the Display Back Cover