4. Slide the cover until it clicks into position.
A properly seated cover is flush with the surface of the chassis.
Inside The Blade
Figure 5. Inside the Blade
1. management riser card 2. optional mezzanine card 1 - Fabric C
3. optional mezzanine card 2 - Fabric B 4. network daughter card
5. memory modules (for processor 1) 6. processor 1 and heat sink
7. cooling shroud 8. memory modules (for processor 2)
9. hard-drive/SSD backplane 10. hard drives/SSDs (2)
11. processor 2 and heat sink 12. memory modules (for processor 2)
13. memory modules (for processor 1)
Cooling shroud

Removing The Cooling Shroud

CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
CAUTION: Never operate your system with the cooling shroud removed. The system may get overheated quickly,
resulting in shutdown and loss of data.
1. Remove the blade from the enclosure.
2. Open the blade.
3. Hold the cooling shroud at both ends near the blade chassis and lift it up and away from the blade.
27