Dell MD3000 - page 12

12 About Your System
NOTICE: This system does not support user-customizable operating modes. Therefore, the split mode LED and
enclosure mode switch are not functional. However, if additional expansion enclosures are daisy chained to your
system, the enclosure mode switch on the RAID array enclosure must be in single-mode position. For more
information, see "Cabling Your RAID Enclosure" on page 21.
Physical Disk Carrier LED Indicators
Each physical disk carrier in your enclosure has two LEDs: an activity LED (green) and a bicolor
(green/amber) status LED (see Figure1-3). The activity LED flashes whenever the physical disk is
accessed. Table1-3 lists the flash patterns for the status LED.
Figure 1-3. Physical Disk Carrier LED Indicators
Enclosure mode switch Unused in this system.
1 activity LED 2 status LED
Table 1-3. Physical Disk Carrier Status LEDs
Status LED Description
Off Physical disk not yet discovered by server or an
unsupported disk is present
Steady green Physical disk is online
Table 1-2. Front-Panel Components (continued)
Component Icon Condition
12