Connecting Fibre Channel Cables to a Host or Switch

Perform this step if your library contains Fibre Channel tape drives that you will be connecting directly to a host or switch.

Use Fibre Channel cables to connect your host (or switch) to the library. For each tape drive:

1Connect one end of the Fibre Channel cable to the Fibre Channel port on the tape drive.

2Connect the other end of the Fibre Channel cable to your host or switch.

 

 

 

 

 

 

1

Fibre Channel port

2

Fibre Channel cable

 

 

14

Dell PowerVault ML6000 Getting Started Guide

Page 14
Image 14
Dell ML6000 manual Connecting Fibre Channel Cables to a Host or Switch