Dell N2000, N3000, N4000 Configuring the Expansion Slots (N3000 Series Only)

312 Managing General System Settings
Configuring the Expansion Slots (N3000 Series Only)
Beginning in Privileged EXEC mode, use the following commands to
configure and view information about the expansion slots and plug-in
modules (cards).
clock summer-time
date {
date month |
month date } year
hh:mm
{ date month |
month dat e} year
hh:mm
[offset offset ]
[zone
acronym ]
Use this command if the summer time does not start and
end every year according to a recurring pattern. You can
enter the month and then the date, or the date and then the
month.
• date — Day of the month. (Range: 1-31.)
•
month — Month. (Range: The first three letters by name)
•
hh:mm — Time in 24-hour format in hours and minutes.
(Range: hh: 0–23, mm: 0–59)
•
offset — Number of minutes to add during the
summertime. (Range:1–1440)
• acronym — The acronym for the time zone to be displ ayed
when summertime is in effect. (Range: Up to four
characters)
CTRL + Z Exit to Privileged EXEC mode.
show clock [detail] View information about the time. Include the detail
keyword to view information about the time zone and
summer time.
Command Purpose
configure Enter Global Configuration mode.
slot
unit/slot cardindex Configured the specified slot (1–2) to use the plug-in
module identified by the
cardindex number (CID). To
view the CID associated with each plug-in module, use the
show supported cardtype command.
CTRL + Z Exit to Privileged EXEC mode.
show slot Display status information about the expansion slots.
show supported cardtype Display informati on about the plug-in modules the switch
supports.
Command Purpose