Selector | Pioneer VSX-36TX, VSX-37TX manual

Using Other Functions

Using the front panel with the MULTI-ROOM system

2,4,5

MULTI-ROOM	INPUT
&SOURCE	SELECTOR

CONTROL
	MASTER
ONO	VOLUME
TUNING +
OL
STATION +
MIN	MAX

3,4,5	1 Press the MULTI-ROOM & SOURCE
3,4,5		button.
		button.
		The display shown below will illuminate when the
		receiver is in STANDBY mode.
		Also, the MR&S button will light.

2 Press the CONTROL button.

The light will start to blink.

1Ç

3Within ten seconds of step 2, select the FUNCTION with the INPUT

SELECTOR.

For this example we'll use the TUNER function. The display shown below will illuminate.

MULTI-ROOM

&SOURCE

CONTROL

memo	If you don't turn the multi room
	function off you won't be able to turn
	the entire main room system off.

The INPUT SELECTOR steps through the functions in the following order:

DVD/LD TV/SAT CD

VCR 1 TUNER MD/TAPE 1

4Press the CONTROL button again and use the INPUT SELECTOR to adjust the VOLUME. The volume can be

adjusted in a range of -82dB to 0dB.

The display will appear as shown below.

5When in TUNER function, press the CONTROL button and use the INPUT

SELECTOR to tune in the station.

The display will appear as shown below.

Ç

Turn the input selector until you get:

80

Image 80

Pioneer VSX-36TX, VSX-37TX manual Selector

Contents

VSX-37TXVSX-36TX For U.S. model Important NoticeFor Canadian model Information to User Important Safety Instructions Quick Start Guide Hooking Up Your DVD Player & TVCoaxial Digital Connection Optical Digital Connection Quick Start Guide Setting up the Remote Control & UnitSpeaker Connections Set the remote control slide switch to Setup Press the System Setup buttonUse the 2 or 3 buttons to choose the DVD/LD setting Digital Input Assignment Playing a DVD with Surround Sound For Better Surround SoundYou should see DVD/LD in the display on the receiver For more information see pages Features Table of Contents Checking the Supplied Accessories How to Use This ManualPreparing the Remote Control Before You Start Installing the Receiver Operating range of remote control unitOpening the Front Panel Inches 20 cm Connecting Your Equipment Cassette deck placementAudio Components Analog audio/video cords Digital Connections Coaxial cords/Optical cables Default settings VSX-36TX model When playing LD recorded in Dolby DigitalExample Connection for a DVD/LD or LD player Digital Input Assignment Connecting DVD/LD players Connecting VCRs or DVRsVideo Components LD player only Satellite TV Components Digital audio coaxial cords Optical cablesOr standard video cord TV/Satellite tuner 5.1 channel analog output jack Multi Channel Input External DecoderComponents equipped with Connecting the Radio Antennas Using external antennasFM wire antenna AM loop antenna To improve FM reception Speakers Speaker terminals Speaker placement Placing Your SpeakersSpeaker impedance First turn the receiver off, then press the STANDBY/ON Connecting Additional Amplifiers Plugging Displays & Controls Front Panel Signal Select button See p.47 Multi CH Input See p.40Tone control buttons Tone button Channel Select button Source indicators VSX-37TX only Input Selector dialPhones jack Video Input jacks See p.15 Display Remote Control Master Volume buttons Input ATT button when USE mode is selectedRemote Setup button when Setup mode is selected System SET UP button when Setup mode is selected Initial Set Up On Screen Display Setting Up for Surround Sound Set the slide switch to SetupPress the System Setup button Speaker Setting See p.32-33 Go on to the next page to continue set up Digital-In Select Digital in Select should be selected if itIsnt use the 5´ buttons to select it Choose a Digital in and assign it an input Speaker Setting Select a speaker setting mode with the 2´3´ buttons then press the Enter button Buttons then press the button Menu Setup Menu Tone will be output Select a Test Tone modeChannel Level When you have adjusted each speaker level Press Enter button to return toPrevious screen Select Exit with the 5/ buttons and press Select Exit to return to the System Setup Menu Crossover NetworkSelect Crossover Network if Continuing from Channel LEVEL, it will Select Setting Start Press the Enter button This completes the speaker setupBass Peak Level Output the test tone for the LFE channel Default setting is OFF If listening at loud volumes we recommend turningDynamic Range Control Use the 2 or 3 arrows to choose OFF, MID or MAX Channel Sound Modes Standard modeBasic Playback Home THX Cinema mode Advanced Theater modes Stereo mode DSP modes Selecting a Sound Mode CH SEL Playing Sources with Dolby Digital or DTS Sound Press the STEREO/DIRECT button to select the stereo mode Stereo indicator lights on the displayPlaying Stereo Sources Press the Receiver button to turn on the receiver VSX-36TX model Switching Analog and Digital Signal InputEach press switches the signal in the order below Each press switches Digital NR on or off Reducing Noise During PlaybackStereo excluding 96 kHz Analog input Digital input Listening in Midnight Mode Listening the Loudness ModeEach press switches Midnight Listening mode on or off Press the Midnight button Adjusting Bass and Treble Multi Channel in Playback KHz 24 bit Performance Press the FL Dimmer button Adjusting the Brightness of the DisplayDirect Playback Dual Mono Setting Put the receiver in Standby mode Using the Tuner Automatic and Manual TuningFor Automatic Tuning For Manual Tuning Example Direct Access TuningTo cancel before inputting the frequency Memorizing Frequently Used Stations Tune in the desired stationPress the Memory button to activate the memory function Press the Class button repeatedly to select a class number Recalling Memorized Stations Setup Remote Control of Other ComponentsSetting Up the Remote Control to Control Other Components Press the Multi Control button for Component you want to controlPress the 2´3 buttons to choose Function and then press the 5´ buttons Learning Commands from Other Remote Controls Press the Remote Setup buttonRemote Control of Other Components Remote SET UP menu appears on your TV screen Press the button to be programmed Using the Remote Control with Other Components SourceEnter Side A/B = Menu Enter TV/VCR VCR & DVD Recorder OperationsChannel -/+ Press to start recording CD-R only CD & CD-R Player OperationsDisc MD Operations Disc DISP/CHARA Exit STB satellite tuner OperationsGuide TV Operations Channel -/+Enter CH Enter For Digital TVs ÷7÷3÷8÷1 BLUE/GREEN/RED Press to fast forward the tape Cassette Deck OperationsPress to rewind the tape Using Other Functions Recording from Audio Components Recording from Digital Audio Components Recording from Video Components To cancel here, press Remote Setup Multi OperationsSelect a Multi Control button for this Multi Operation Mode THX, ADVANCED, Standard Stereo by inputting that command forRepeat steps 4 and 5 to input Multi OPERATIONs to the Multi Control System Off Select a component by pressing its Multi Control button Setting Up the Direct FunctionUsing the System Off Button Resetting the Remote Control Remote Back Light Erasing Learned Remote Control Commands Erasing All Learned Commands and Preset Codes Video Select Set up example Multi-RoomMULTI-ROOM connections Sub room Main room MULTI-ROOM set up Press System Setup on the remote controlSelect the Volume Level by using the 2´3 buttons Also make sure that the TV is on and set to the receiver Selector Using the remote control with the MULTI-ROOM system Press Volume +/- to adjust the volumePress a Function button to select the sub function Receiver from the sub room Pioneer SR System Operating other Pioneer components Techno Tidbits & Problem-solving Dolby DigitalLaser disc format Comparison with Dolby Pro Logic Surround Techno Tidbits & Problem-solving DTS Preset Code List Techno Tidbits & Problem-solving Troubleshooting Symptom Cause Remedy Analog DTS Techno Tidbits & Problem-solving EIA Listening Specifications Furnished Parts Power cord CautionMaintenance of External Surfaces 0 4 2 1 1 4 0