Basic Playback
Adjusting Bass and Treble
You can use BASS +/– or TREBLE +/– buttons to adjust the low and high frequencies for each individual set of speakers. If the receiver is in STEREO mode you can only adjust the FRONT speakers. In a surround mode (STANDARD, ADVANCED THEATER, etc.) you can adjust the FRONT, CENTER, SURROUND and SURROUND BACK speakers. The TONE button can also be used to bypass the tone circuitry (see p.22).
1 | 2 |
| NºmÀ²³õm |
| 3 |
1Press the TONE button on the front panel to put the receiver in tone TONE: ON mode.
2Press the CHANNEL SELECT button on the
front panel to cycle through the different tone adjust modes.
The button cycles though the possibilities in the following order:
TONE Front 
TONE Center
TONE SurBack 
TONE Surr. 
3Use the BASS or TREBLE
A few seconds after you finish adjusting the tone the receiver will revert to the sound mode it was in at the beginning of the process.
memo | • The tone control can be adjusted in a range of ±6 dB. | |
• The tone control cannot be adjusted in THX and MULTI CH | ||
| ||
| IN modes. | |
| • If the receiver is in DIRECT mode and you press the TONE | |
| button, TONE BYPASS will appear in the display, letting you | |
| know that you can't change the tone in DIRECT mode. An- | |
| other press cancels DIRECT mode. |
50
