Displays & Controls
Display
All the display information is explained and/or referenced here.
1 |
| 2 3 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 |
| 12 | 13 | ||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SIGNAL ATT |
|
|
|
|
|
|
|
|
| DSP |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||
|
|
|
| LOUDNESS |
| MIDNIGHT |
|
| STEREO |
|
|
|
|
|
|
|
|
| VOLUME |
|
|
| ||||||||||||
|
|
|
|
|
| PRO LOGIC |
|
|
|
|
| |||||||||||||||||||||||
|
| SELECT OVER |
| H.P |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ANALOG SP | AB | DIGITAL | ||
DIGITAL | MONO STEREO | dB | ||
TAPE 2 | ||||
AUTO | TUNED AMFM | |||
|
| |||
L | C | R | LFE |
|
LS | S | RS |
|
|
PREPARATION
15
1SIGNAL SELECT indicators
Light to indicate the input signal you selected.
ANALOG : Lights when analog signals are assigned.
DIGITAL: Lights when digital audio signals are selected.
AUTO: Lights when the receiver is set to select the input signal automatically.
2 Program Format indicators
DTS: Lights when a source with DTS audio signals is played.
For Dolby Digital or DTS sources: These indicators change according to which channels are active in the source. When all three LS (left surround), S (surround) and RS (right surround) light at the same time it means a source with a Surround EX or DTS ES flag is being used.
L – Left front channel. C – Center channel.
R – Right front channel.
LS – Left surround channel. S – Surround channel (mono). RS – Right surround channel.
LFE – Low Frequency Effects channel.
3 Analog level indicators
OVER – When the source signal is analog, this lights if the signal is in danger of distorting. Press INPUT ATT on the remote control to lower the signal level.
ATT – Lights when INPUT ATT is used to reduce the level of the analog source signal.
4Speaker indicators
Light to indicate the current speaker system, A and/or B.
5LOUDNESS indicator (See p.49)
Lights when the LOUDNESS mode is on.
6H.P (headphones)
Lights when headphones are connected to the PHONES jack (speakers systems A and B both turn off automatically).
14
7MIDNIGHT indicator (See p.49)
Lights when the MIDNIGHT LISTENING mode is on.
8DSP indicator (See
Light when a DSP or Advanced Theater mode is selected.
9STEREO indicator
Lights when a STEREO mode is selected.
10Radio Frequency/Function indicator
Displays the function or the frequency of the current radio station.
112/dts mode indicators
2DIGITAL : When the 2/dts mode on the
receiver is on, this indicator lights to indicate playback of a Dolby Digital signal. However, 2 PRO LOGIC lights during 2 channel playback of Dolby Digital.
2PRO LOGIC: When the 2/dts mode on the receiver is on, this indicator lights during 2 channel playback.
DTS : When the 2/dts mode on the receiver is on, this indicator lights to indicate playback of a DTS signal.
THX: Lights when the HOME THX CINEMA mode is selected.
12 MASTER VOLUME indication
Displays current volume level.
13 TAPE 2 indicator
Lights when the TAPE 2 monitor is on.
14 Character display
Shows current mode, status, etc.
15 Tuner indicators
MONO: Lights when the tuner is set to receive FM broadcasts and when selected MPX mode. STEREO: Lights when a FM stereo broadcast is received in the auto stereo mode.
TUNED: Lights when a broadcast is received.
AM/FM: Light to indicate the current band (FM or AM).
25
