Pioneer VSX-36TX, VSX-37TX manual Placing Your Speakers, Speaker impedance, Speaker placement

Connecting Your Equipment

Speaker impedance

You can change the speaker impedance for 36TX but we recommend using speakers with an impedance of 8Ω- 16Ω (the default setting). If you are using 6Ω- less than 8Ω impedance speakers, you need to change the impedance setting. It is not necessary to switch the speaker impedance when using the VSX-37TX. Use any speaker rated between 6Ω-16Ω.

STANDBY/ON	First turn the receiver off, then press the STANDBY/ON
	button while holding down the SPEAKERS button.

NºmÀ²³õm	Choose the impedance setting by pressing the SPEAKERS button
	again. You can choose the 8Ω-16Ωsetting or the 6Ω-8Ωsetting.
	SIGNAL	VOLUME
SPEAKERS	SELECT	dB (This display indicates a 6Ω-
	ANALOG SP A
		less than 8Ω impedance
memo
		setting.)

To check which impedance setting to hold down the SPEAKERS button for 2-3 seconds. You'll get a display like these telling you the speaker impedance setting.

SIGNAL

SELECT

ANALOG SP A

VOLUME

dB

(This display indicates an 8Ω- 16Ω impedance setting.)

Placing Your Speakers

Proper speaker placement is essential to realize the best sound from your system. The diagram and tips given here are just a rough guide; be sure to read the instructions that come with your speakers.

Speaker placement

If you have a multiple speaker arrangement the placement of the speakers is extremely important. To achieve the best possible surround sound, install your speakers as shown below. Make sure all speakers are installed securely to prevent accidents and improve sound quality. Be sure to consult your speaker manuals for the best placement of the speakers. Some speakers are designed to be floor-standing but others benefit greatly from speakers stands which raise them off the floor.

memo

Front		Front
Left	Center	Right

Sub

Woofer

SurroundSurround

Listening

LeftRight

Position

Surround Back	Surround Back
Left	Right

•Install the left and right front speakers at equal distances from the TV.

•When installing speakers near the TV, we recommend using magnetically shielded speakers to prevent possible interference such as distortion in the color of the TV screen. If you do not have magnetically shielded speakers and notice discoloration of the TV screen, place the speakers farther away from the TV.

•Install the center speaker above or below the TV so that the sound of the center channel is localized at the TV screen.

CAUTION:

When installing the center speaker on top of the TV, be sure to secure it with tape or some other suitable means. Otherwise, the speaker may fall from the TV due to external shocks such as earthquakes, and it may lead to endangering those nearby or damaging the speaker.

•If possible, install the surround speakers slightly above ear level.

•It may be difficult to obtain a cohesive surround effect if the surround speakers are installed farther

20 away from the listening position than the front and center speakers.