Dell NNM SE 1.2 +DUGZDUH,QVWUXPHQWDWLRQ,QVWDOODWLRQ

Installation and Upgrade Procedures 2-9

NOTE: If you want to install both a Dell managed node and a management

workstation on the same server, make sure to reboot the server between the two

installations.

After you have selected a Windows NT or NetWare installation and t he You have a

current version of Dell OpenManage HIP installed. Do you want to

install additional hardware components? message appears, perform

these steps:

1. C li ck Yes to continue to add hardware components.

2. Click No and the following message appears.

Do you want to overwrite the current installation of Dell

OpenManage HIP?

3. Click Yes to install or click No to stop the installation process.

Double-click the Uninstall Hardware Components icon in the Dell Managed Node

folder. Doing so uninstalls only the hardware components that you i nstalled

separately.

NOTE: To uninstall originally installed components, refer to “Uni nstalling a Dell Man-

aged Node From a Windows NT Server” found later in this chapter.

+DUGZDUH,QVWUXPHQWDWLRQ,QVWDOODWLRQ 

Instrumentation for a hardware vendor component has to be r un ning on the man aged

server in order for the console application to be able to manage/monitor it. A check

box is provided for the different instrumentation that can be installed as part of the

Dell HIP node installation process.

To install a particular hardware component, check the box corresponding to the hard-

ware installed on the managed server. The drivers for the respective hardware must

be installed prior to installation of the instrumentation. In some cases, the driver is

included as part of the Dell HIP managed node installation process when the compo-

nent is chosen (for example, DRAC version 2.0).

After the chosen hardware component instrumentation is installed as part of the Dell

HIP node installation, remember to reboot the system. The instrumentation and

required services start automatically. If they fail to start, that component may not be

manageable from the management console.

NOTE: The Dell Inspector is automatically installed wh en the Dell managed node is

installed. On the managed node server, the Dell Inspector starts a service called

dmisrvfor use with the Microsoft Systems Management Server (SMS) database.

Program folders allow for launching the Dell Inspector from the

Start

button.