Dell P2011Ht appendix Using the On-Screen Display OSD Menu, Accessing the Menu System

5

Power (with power light

indicator)

Use the Power button to turn the monitor on and off.

The Blue LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode.

Using the On-Screen Display (OSD) Menu

Accessing the Menu System

NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear.

1.Press the MENU button to launch the OSD menu and display the main menu.

Main Menu for Analog (VGA) Input

or

Main Menu for Digital (DVI-D) Input

NOTE: AUTO ADJUST is only available when you use the analog (VGA) connector.

2.Press the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the following table for a complete list of all the options available for the monitor.

3.Press the or button once to activate the highlighted option.

4.Press the and buttons to select the desired parameter.

5.Press to enter the slide bar and then use the or button, according to the indicators on the menu, to make your changes.

6.Press the button once to return to the main menu to select another option or press the button two or three times to exit from the OSD menu.

Icon	Menu and Submenus	Description
	Energy Gauge	This meter shows the energy level being consumed by the monitor in real time. When the meter is green, it indicates the mon
		consuming low energy level. When the energy consumed increases, the meter will change to yellow and subsequently red.