Dell P2310H Display Use the Display Settings to adjust image Wide Mode, Horizontal P Osition

Display	Use the Display Settings to adjust image.
Settings

Wide Mode	Adjust the image ratio as 4:3 or full screen.
Horizontal P
osition	Use the	or	to adjust image left or right. Minimum is '0' (-). Maximum is '100' (+).
Vertical Pos
ition	Use the	or	to adjust image up or down. Minimum is '0' (-). Maximum is '100' (+).
Sharpness
	This feature can make the image look sharper or softer. Use			or	to adjust the sharpness from '0' to '100'.
Pixel Clock	The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference.
	Use the	or	to adjust for best image quality.
Phase	If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase
	(fine) again.
	NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.
Reset	Select this option to restore default display settings.
Display
Settings
Other	Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on
Settings	screen, and so on.
Language	Language option to set the OSD display to one of eight languages (English, Espanol, Francais, Deutsch, Brazilian Portuguese,
	Russian, Simplified chinese or Japanese).
Menu Trans	Select this option to change the menu transparency by pressing 1st or 2nd buttons (Minimum: 0 ~ Maximum: 100).
parency
Menu Timer	OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button.
	Use the	or	to adjust the slider in 5 second increments, from 5 to 60 seconds.
Menu Lock	Controls user access to adjustments. When Lock is selected, no user adjustments are allowed. All buttons are locked.
	NOTE: When the OSD is locked, pressing the menu button takes the user directly to the OSD settings menu, with OSD Lock
	selected. Select "Unlock" to unlock and allow user access to all applicable settings.
Menu	Rotates the OSD by 90 degrees counter-clockwise. Your can adjust the menu according to your Display Rotation.
Rotation
Power Save	To turn on or off Audio Power during Power Save mode.
Audio
DDC/CI	DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance etc) to be adjustable
	via software on your computer. You can disable this feature by selecting "Disable".
	Enable this feature for best user experience and optimum performance of your monitor.