1
2
3
1 | 2 | battery | battery tabs (2) |
NOTE: To replace the battery, follow the removal procedure in reverse order. When you are replacing the battery, ensure that you properly insert the two battery tabs into the corresponding slots in the base of the computer.
8Press the power button to ground the system board.
9Remove any installed ExpressCard from the ExpressCard slot.
10Remove any media from the optical drive, if installed.
11Remove the hard drive (see "Hard Drive" on page 116).
Optical Drive
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
1Turn the computer
2Remove the
3Insert a scribe into the notch by the screw hole and push the scribe toward the optical drive bay to release the optical drive from the bay.
Adding and Replacing Parts