Back to Contents Page
System Fan
Dell™Latitude™D530ServiceManual
1. Follow the instructions in Before Working Inside Your Computer.
2. Remove the palm rest (see Removing the Palm Rest).
3. Remove the two M2.5 x 5-mm screws from the fan, and then remove the connector that connects the fan to the system board
Back to Contents Page
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the
computer.
1
M2.5 x 5-mm screws (2)
2
fan
3
fan connector
4
system board connector