OSD Warning Messages
Factory Reset
Back
ResetallOSDsettingstothefactorypresetvalues.
Push to go back to or exit the main menu.
When the monitor does not support a particular resolution mode you will see the following message :
or
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor Specifications
fortheHorizontalandVerticalfrequencyrangesaddressablebythis
monitor. The recommended mode is 1920 X 1080.
WhenmonitorentersPowerSavemode,thefollowingmessageappears:
or
Activate the computer and wake up the monitor to gain access to the OSD
If you push any button other than the power button one of the following messages will appear depending on the selected input:
VGA/DVI-D input