Dell S300W light on your eyes, Presentation mode, Bright mode, Movie mode, sRGB, or Custom mode

5	Laser	Point the remote control at the screen, press and
		hold the laser button to activate the laser light.
		CAUTION: Do not look at the laser point
		when it is active. Avoid directing the laser
		light on your eyes.
6	Aspect Ratio	Press to change aspect ratio of a displayed image.
7	Keystone adjustment	Press to adjust image distortion caused by tilting
		the projector (+40/-35 degrees).
8	Page up	Press to move to previous page.
		NOTE: The USB cable must be connected if
		you want to use the Page Up feature.
9	Page down	Press to move to next page.
		NOTE: The USB cable must be connected if
		you want to use the Page Down feature.
10	Keystone adjustment	Press to adjust image distortion caused by tilting
		the projector (+40/-35 degrees).
11	S-Video	Press to choose S-Video source.
12	Video	Press to choose Composite Video source.
13	Video mode	The projector has preset configurations that are
		optimized for displaying data (presentation
		slides) or video (movies, games, etc.).
		Press the Video Mode button to toggle between
		Presentation mode, Bright mode, Movie mode,
		sRGB, or Custom mode.
		Pressing the Video Mode button once will show
		the current display mode. Pressing the Video
		Mode button again will switch between modes.
14	Blank screen	Press to hide/unhide the image.
15	Up	Press to navigate through the On-Screen Display
		(OSD) Menu items.
16	Left	Press to navigate through the On-Screen Display
		(OSD) Menu items.
17	Menu	Press to activate the OSD.

30

Using Your Projector